日本と海外をつなぐクラウドソーシング

CA M&E Engineering Pte Ltd, Singapore

Senior Quantity Surveyor

2018/10～

 Reviewing tender documents for Lift, Escalator& Security System
 Produce measurements fast, accurately and complete within the targeted time schedule
 Provide estimating cost, obtain the best or lowest possible price
 Implement contract administration procedure to ensure proper documentation of records concerning variation, submitting accurate cost and time implications of client
 Preparation of list of pre-qualified bidders for procurement-bid invitations, comparison, cost analysis, negotiation, and awarding contract agreement to sub-contractors and suppliers
 Prepare and fill in Breakdown of Cost, Schedule of Unit Rates, Schedule of Technical Data forTender Submission for government tender from Gebizetc..but not limited to the mentioned
 Understanding the implications of health and safety regulations
 Identifying, analyzing and developing responses to commercial risks
 Prepare Lift and Security system drawings for submission
 Prepare for monthly Progress Claim, DO & Invoice and VO for project and maintenance works.
Project Reference : @ Jurong East Sports Centre
@ Jurong West Sports Centre
@ St. Andrew Community Hospital
@ National Library Board (Public Library-Toa Payoh)
@ Sengkang Fire Station & Civil Defence Academy
@ National Youth Council (The Red Box)
Maintenance Reference : @ NEA Markets
@ PUB (All Around Singapore)
@ ITE HQ & CC
@ Bishan Community Club
@ St. Andrew Community Hospital
@ MINDS (HQ, LKCG School and FG School)
@ Singapore Sport Council (Jurong East & Jurong West)
@ Science Center
@ MOE Schools (North 1, South 2 & West 2)

P3 Project Pte Ltd, Singapore

Assistant Engineer (Piping)

2016/12～ 2018/10

For Tendering
 Site walk down to check the job scopes for the invitation of tender from the client.
 Follow design for the size of process pipes and fittings as per client requirement specification (Foster wheelers and American Society Mechanical Engineering B31.3,IX).
 Quantity taking off for the process pipings, fittings and so on as per tender requirement.
 Liaising with Supplier for RFQ and chasing for Quotation.
 Preparing Comparison table of supplier quotations.
 Preparing Cost Estimation and Technical Proposal.
 Data Collecting and preparing for Technical data, Schedule of rate and Schedule of Maintenance.
 Preparing Tender Submission and solving the Post Tender Questionnaires
For Awarded Project
 Ensuring projects carried out on site are in accordance with project specifications and references (Foster wheelers and American Society Mechanical EngineeringB31.3,IX)
 Recommending NDT to be carried out based on project references and if unable to implement due to site condition recommend equivalent NDT to be carried out
 Ensure materials of construction are used as per contract awarded with certificates available.
 Preparing QC Documents and procedures such as ITP, QCPlan, Method Statement, Test Pack, etc.
 Performing routine inspection, monitoring & assurance of site activities (Fabrication and Welding and Installation) in accordance with the Projects and Client’s specifications, and Quality Plans.
 Interpreting and evaluation of NDT Results, witnessing Hydro test, MPI test.
 Checking Shop Drawing/As built Drawing before Submission.
 Taking off quantity and measurement based on AFC Drawings (Unit Rate Contract).
 Preparing and submit for Monthly Progress Claims& Variation Orders.

Meng Thong Construction Pte Ltd(Singapore)

Quantity Surveyor

2015/10～ 2016/10

 Calculate for bill of quantities and estimate for C&P works of the projects.
 Submission for indent of material requirement for the projects.
 Calculation of estimate cost and checking the bills of Sub-Contractors.
 Preparing “Construction Drawing” and “As Built Drawing” to submit and installation.
 Prepare quotation and purchase order for C&P works.
 Prepare monthly progress claim to submit to main-con.
 Arrange to do PO and monthly payment to suppliers & sub-contractors.
 Supervision, Coordination and Corporation with contractors and suppliers.
 Checking on site with shop drawings and adjust with Structural & M&E drawings and working together with Site Engineers.
 Assist the manager in other quantity surveying duties.

ALSYS Pte Ltd, Singapore

Facility Engineer

2015/01～

 Responsible to perform maintenance for Plumbing, Sanitary & Fire Fighting works.
 Co-ordinate with Engineers on site requirements.
 Prepare and updated M&E drawings for the building as required.
 Complete Monthly checklist for maintenance under charge.
 Arrange for external M&E servicing if required.
 Ensure safety of all workers on site.
 Attend to all complaints immediately.
 Prepare quotation for facility works.
 Assist to take charge of store.
 Tooling management and performing calibration and tools maintenance.
 Manpower Arrangement and daily work report.

Capital Construction Co.,Ltd, Myanmar

Assistant M&E Engineer

2013/10～ 2015/03

A. Design Drawing and Coordination work
1. Plumbing & Sanitary System
2. ACMV & Fire Protection System
 Coordinate with Senior Design Engineer and prepare design drawings (Auto CAD& Revit) for P&S schematic and Layout including details and section for approval.
 Prepare and draw ACMV and Fire Protection design drawings (Auto CAD & Revit) for approval
 Coordinate with team members and draw M&E CSD drawings for approval.
 Prepare shop drawings and CSD to submit the head of department (Auto CAD & Revit)
 Issuing approval drawings to sub-contractor as construction drawing.
 Meeting with designers and subcontractors on a regular basis to ensure the construction, installation and commissioning works are developing as planned.
 Attend for BIM Coordination meeting at HQ.
 Liaising with Consultant for Design Approval.
 Checking Shop Drawing/As built Drawing before Submission.
 Drafting As Built Drawings (Autocad& REVIT)

B. QS Calculation

 Calculate for bill of quantities and estimate for Mechanical services of the projects.
 Submission for indent of material requirement for the projects.
 Calculation of estimate cost for mechanical.
 Checking the bills of Sub-Contractors.

C. Site supervision and coordination

 Coordinate and corporate with project team/sub-contractor/client and supplier for sequence of work and quality of work.
 Monitoring and supervision for ensuring M&E design, installation & commissioning programmes are incorporated into the main programme
 Installation and commissioning works are managed in accordance with the relevant quality procedures.
 Looking ahead to ensure designs/technical issues /engineering problems are identified early so that they can be addressed without negatively impacting on the programme.
 Check the bills of Sub-Contractors.
 Prepare daily and monthly progress report.
 Arrange all drawings transmittal form.

Company : No.1 Government Bicycle Factory
Position : Junior Engineer Cum Quality Control
Duration : 2nd Mar 2009 to 30th Feb 2011
Description (Scope of Work)

 Controlling and running heavy machinery for produce pieces of bicycles.
 Checking steel sizes and quality.
 Working together with senior engineers and Indian engineers to control of bicycle qualities and production.
 Control heavy machinery to produce stool of bicycles.
 Making lists of required quantities of materials. Attended the meetings with consultants
 To control accuracy and consistency of project.
 Making daily and monthly progress report
 Preparing the monthly reports to PM

Pioneer Services International Co., Ltd, Myanmar

Admin cum Coordinator Executive

2007/11～ 2009/03

 Answering visitors' inquiries about a company and services, directing visitors to their destinations, sorting and handing out mail, answering incoming calls on multi-line telephones
 Setting appointments, filing, Patients' records keeping, data entry and performing a variety of other office tasks, such as faxing or emailing
 Handling customers' complaints and reports to manager.
 Provides the coordination and implementation of office procedures and supervise the work of junior staffs.
 Asset and support for team performance and problem solving.
 Working together with volunteers and go short trip by arranging from company for improve company.
 Prepare daily and monthly progress report.
 Support to management, including executives, using a variety of project management, communication & organizational skills.
 Assist to country manager (Lower Myanmar) with arrange of appointment, meeting, and personal interview to employee, report and briefings.
 Provided full secretarial and clerical support to administration management team.
 Screen, handle and redirect calls.
 Manage regional and overseas travel arrangements and accommodation as and when required.
 Planning and scheduling for promotion and events.
 Build update consolidated report and performance report
 Responsible for daily operations of all Account Receivables, Account Payable and updating Accounting system.
 Keeping track of Customer accounts and ensuring all payments are received.
 Generating Invoices for billing to customers & update of receipts.
 Handle the day-to-day general office administration duties.