日本と海外をつなぐクラウドソーシング

Tsuneishi Technical Services (Phils.) Inc

Design Technician

2014/03～ 2017/03

TSUNEISHI TECHNICAL SERVICES (PHIL’S.), INC. is a Technical Service Provider of TSUNEISHI HEAVY INDUSTRIES, A Ship Building Company.

Duties & Responsibilities:

Technical Jobs
• Preparation of data of piece drawing for numerical control machines. On the graphic of CAD,
outline of each piece is drawn the supplemental information which contain name, installation
stage, direction of beveling, attribution of each line (outline, hole, marking line, etc.)

• Preparation of data of small piece drawing not used for numerical control (NC) machine. Small
pieces (generally the size below 300 mm. X 300 mm.) which cannot be controlled by NC machine
plotted out by actual size through copy machine after preparation of data in the graphic of CAD.
Based on these data of actual size, each piece is fabricated by hand cutting or by the use of eye
tracer machine.

• Preparation of list of production data for profiles and flat bars. As all profiles and flat bars are
fabricated by hand marking/hand cutting, it is necessary to prepare the list for marking which
shows shape of both ends, size and position of air holes/drain holes, base line for installation and
etc.

• Prepares Fore side and Aft side fitting position of draft mark based on the Arrangement of Draft
Mark drawing.

• Provides expanded drawing of brackets, stiffeners, hawse pipe, chain pipe, and exhaust pipe for
turbocharger outlet using 2D or 3D drawings depending on the complexity.

• Coordinates with steel processing department and the erection or assembly department for
requirements of material and methods of repairs.

• Prepares a list for location of demarcation lines based on schedule of painting.

• Deals with revision/repair of drawings for material supplement.

• Confers with the different piping teams for accuracy of plans and updates in drawings if any.